Daily Junction.mobi portalLifestyle · July 2, 2026 · Priya Anand · 5 min
A new gas boiler costs £1,800–£4,500 fully installed in 2026, depending on the type, brand and complexity of the swap. Here is what you should pay — and how to avoid being overcharged.
A boiler replacement is one of those household expenses that arrives uninvited — usually in the middle of winter, when the old one has just packed up and you are negotiating with a heating engineer while wearing three jumpers. Understanding what a fair price looks like before you are in that position is the difference between paying the market rate and paying a distress premium.
In 2026, a straightforward combi-boiler swap costs £1,800–£2,800 fully installed. The range is wide, and the factors that determine where you land on it are worth understanding before you pick up the phone.
The table below shows typical installed costs for the three main boiler types in 2026, based on Which?, Boiler Guide and installer-quote data. All figures assume a like-for-like replacement — the new boiler is the same type as the old one and goes in the same location.
| Boiler type | Typical installed cost | Best for |
|---|---|---|
| Combi (combination) boiler | £1,800–£2,800 | Flats and houses with 1–2 bathrooms; compact (no cylinder or tank), hot water on demand |
| System boiler | £2,200–£3,500 | Houses with 2+ bathrooms; works with a hot-water cylinder, good for simultaneous hot-water use |
| Heat-only (regular) boiler | £2,000–£3,200 | Older properties with existing cylinder and cold-water tank; often the most practical replacement in period homes |
These prices include the boiler unit, installation labour, a system flush (chemical clean of the central-heating system), a magnetic filter (which traps sludge and extends the boiler's life), the flue and condensate pipe, and Building Regulations notification through Gas Safe Register or a competent-person scheme. They do not include a new hot-water cylinder (£400–£800) or cold-water tank (£150–£300) if those also need replacing.
A typical £2,500 combi-boiler replacement breaks down as follows:
| Component | Approximate cost |
|---|---|
| Boiler unit (mid-range, e.g. Worcester Bosch Greenstar 4000 30kW) | £1,100 |
| Installation labour (1–2 days, Gas Safe registered engineer) | £700 |
| System flush (chemical clean) | £120 |
| Magnetic filter (e.g. MagnaClean, Fernox TF1) | £100 |
| Flue, condensate pipe and fittings | £150 |
| Thermostat / controls upgrade | £120 |
| Building Regulations notification (Gas Safe Register) | £50 |
| Waste removal (old boiler and packaging) | £60 |
| Sundries (pipe, solder, inhibitor, sealant) | £100 |
| Total | £2,500 |
If the boiler is being moved to a different location — for example, from a bedroom cupboard to the kitchen, or from the kitchen to the loft — the additional pipework and labour typically add £500–£1,000.
Changing from a heat-only boiler with a hot-water cylinder and cold-water tank to a combi boiler — a "system conversion" — costs more than a straightforward swap. The old cylinder and tanks must be removed, the pipework reconfigured, and the system flushed and recommissioned. A typical combi conversion costs £3,000–£4,500.
The main reason to convert is to reclaim the space occupied by the cylinder and tanks — an airing cupboard and part of the loft — and to benefit from the efficiency of heating water on demand rather than storing it. The trade-off is that a combi boiler cannot supply hot water to two outlets simultaneously at full pressure, so a house with two or more bathrooms where showers are often running at the same time is better served by a system boiler with a cylinder.
The most tangible financial benefit of a new boiler is the efficiency gain. A modern condensing boiler is 90–94% efficient, meaning 90–94% of the energy in the gas is converted into heat for your home. A 15-year-old non-condensing boiler might be 65–75% efficient — wasting 25–35p of every pound spent on gas.
For a household spending £1,200 per year on gas, upgrading from a 70%-efficient boiler to a 92%-efficient one saves roughly £280–£350 per year. At that rate, a £2,500 replacement pays for itself in 7–9 years through efficiency savings alone — and the new boiler should last 10–15 years with annual servicing.
The government is pushing heat pumps as the long-term replacement for gas boilers, and the Boiler Upgrade Scheme provides a £7,500 grant towards installation. An air-source heat pump costs £7,000–£13,000 fully installed (before the grant), meaning the homeowner's net cost after the grant is £0–£5,500.
Heat pumps are more efficient than gas boilers (300–400% efficient vs 90–94%), but electricity costs roughly 3–4 times as much as gas per kWh, which largely erases the efficiency advantage in running costs. The financial case for a heat pump in 2026 rests on the grant and the expectation that the ratio of electricity to gas prices will narrow over time as grid decarbonisation proceeds and gas prices incorporate carbon costs.
For most households replacing a broken boiler in 2026, a like-for-like gas boiler remains the pragmatic choice — cheaper upfront, familiar technology, and a large pool of installers who can fit it within days. The heat-pump case strengthens for new builds, off-gas-grid properties, and homeowners planning to stay for 15+ years who can amortise the higher upfront cost over a longer period.
A boiler replacement is a significant expense, but it is also a predictable one — most boilers last 10–15 years, and the warning signs (noise, pressure loss, rising gas bills, uneven heating) give you time to plan. Getting quotes while the old boiler is still working, rather than waiting for it to fail on a cold January morning, saves money and stress in equal measure.
![[View image]](/img/cost-of-a-new-boiler-uk-2026.jpg){kind=link}